Trade Copier: How to create a connection (master → receiver)

Quick answer

1. Open Trade Copier
2. Click Create Connection
3. Pick a Master
4. Pick one or more Receivers
5. Choose sizing (start simple: Lot Multiplier = 1.0)
6. Save and ensure the connection is enabled
7. Verify in Logs

Symptoms (when you need this)

• You connected accounts, but nothing is copying because no connection exists

Most common mistakes

• Creating a connection but leaving it disabled
• Selecting the wrong direction (wrong master/receiver)
• Not verifying with Logs after setup

Step-by-step (with screenshot prompts)

1) Open the Trade Copier page

• Go to Trade Copier

Screenshot to add later:

• Connection list + “Create Connection” button

2) Create the connection

1. Click Create Connection
2. Select the Master account
3. Select one or more Receiver accounts

Screenshot to add later:

• Master selection and receiver selection screen

3) Pick sizing

Recommended for first test:

• Lot Multiplier = 1.0

4) Save and enable

1. Save the connection
2. Ensure the toggle is ON (enabled)

Verify it worked

1. Place a tiny test trade on the master
2. Open Logs
3. Confirm you see a green copied event for the receiver

If it doesn’t copy (Escalate)

1. Read: Troubleshooting: Trades not copying
2. Or open Copy Not Working? → run quick scan

This article is auto-synced from the Danetrades Copier knowledge base. If something is outdated, please contact support.