Symptom: Receiver opens trade but SL/TP is missing

Quick answer

This usually happens when SL/TP was blocked or rejected.

1. Check Logs for "invalid stops" or modify failures
2. Ensure modify events are not blocked by filters
3. Confirm SL/TP is valid for the receiver (distance rules)

Symptoms

• Receiver opens the trade but SL/TP is not set
• SL/TP exists on master but not receiver

Most common causes

• Invalid SL/TP (too close / wrong side)
• Modify events blocked by filters/news settings
• Broker rejects modifications during volatility

Fix steps

1. Check Logs for the modify error
2. Temporarily test without SL/TP to confirm base copying works
3. Add SL/TP back with conservative levels

Verify it worked

1. Place a tiny test trade with SL/TP
2. Confirm receiver shows SL/TP

This article is auto-synced from the Danetrades Copier knowledge base. If something is outdated, please contact support.